2027 Peterbilt 589
Call For Price (803) 832-7700
This new 2027 Peterbilt 589 day cab is spec’d for log and lumber hauling, with a 525 HP Cummins X15 Performance Series engine producing 1,850 lb-ft of torque, paired with an Eaton Endurant XD Pro 18-speed automated transmission. It runs on Meritor 46,000 lb tandem rears with 3.73 gearing and full-locking differentials, rides on Peterbilt Air Trac suspension, and is rated for 110,000 lbs GCW. It also has Bendix air disc brakes, predictive cruise, and a Jacobs engine brake. It’s backed by Peterbilt Class 8 standard coverage of 1 year/100,000 miles. Contact us to learn more.
- Stock Number:
- VD 857536
- Model:
- 589
- Location:
- The Peterbilt Store - Columbia
Overview
Overview
This new 2027 Peterbilt Model 589 Traditional is a conventional day cab tractor built for lumber and log hauling with a 53' flatbed trailer. It is rated for a gross combination weight of 110,000 lbs and set up for 90% highway and 10% Class B operation, with a 6% maximum grade rating. Polished stainless, chrome, and aluminum appear throughout, and the paint is a black Axalta two-stage effect metallic/pearl finish.
Engine & Drivetrain
Power comes from a Cummins X15 Performance Series engine rated at 525 HP at 1,700 RPM, governed at 1,900 RPM, with 1,850 lb-ft of torque at 1,000 RPM. It is a 2024 series emissions engine, EPA emissions compliant and EPA idling compliant. The powertrain is optimized for performance in heavy-GCWR applications. The engine is backed by an Eaton Endurant XD Pro EXDP-18F118D 18-speed automated transmission with a performance shift calibration, a right-hand column-mounted shifter, a dash rock-free mode switch, neutral coast mode at the pedal only, and an oil-to-water transmission cooler. A Jacobs compression brake is controlled from the right-hand column. Predictive cruise control is included, the effective vehicle speed limiter is set at 65.0 MPH or greater, and the typical operating speed is 75 MPH. The drivelines are an RPL20 interaxle and an RPL25 SD main driveline with one midship bearing. A dash-mounted single-acting electric-over-air PTO control and a 12-pin remote PTO/throttle provision in the engine bay are fitted. Engine equipment includes EMUX electronics architecture, a steel front engine support in place of standard aluminum, a high-efficiency cooling system, a 2-speed fan clutch for frequent start/stops, a 37.4 CFM air compressor, and a Davco 382 fuel/water separator. Air comes through cowl-mounted 15" premium stainless air cleaners with slotted stainless caps. The exhaust is dual with a single-module DPF/SCR mounted under the cab on the right-hand side, 36" chrome-plated 7" standpipes with curved tips, chrome exhaust pipes, and a DPF regeneration switch. The electrical system includes a PACCAR 160-amp brushed alternator, a PACCAR premium starter, three PACCAR premium 12V dual-purpose batteries totaling 2,190 CCA, a 110–120V immersion block heater, a battery jumper terminal under the hood, a Kissling 300A cab power disconnect switch, and a low-voltage disconnect system.
Chassis & Axles
The wheelbase is 226", with a 99.9" front axle to back of cab measurement, 126.1" cab to axle, and 181.8" cab to end of frame. The frame uses 10-5/8" steel rails at 5/16" thickness with zinc-coated anti-corrosion treatment, aluminum crossmembers, heavy-duty iron front spring brackets, and a tapered tractor end of frame with crossmember and kingpin cutout. Up front is a Meritor MFS+13B wide-track steer axle rated at 13,200 lbs with a 3.5" drop, on taper leaf springs with Tenneco shocks, greasable spring pins, and 80 mm spacer blocks. Steering is a Sheppard HD94 power steering gear with a frame-mounted reservoir. The rear axle is a Meritor RT46-164E rated at 46,000 lbs with a 5/8" wall and a 3.73 ratio. It has tandem differential locks with speed interlock, a separate dash control for full-locking traction, and synthetic lubricant in all axles. PHP10 aluminum PreSet+ hubs are used front and rear. Bendix ADB22X air disc brakes are fitted on the steer and tandem drive axles. Safety systems include Bendix ESP electronic stability with automatic traction control, 6S/6M ABS, a tire pressure monitoring system, and a pneumatic park brake. Ratings are 13,200 lbs front GAWR, 23,000 lbs on each rear axle, and 59,200 lbs GVWR.
Suspension
The rear suspension is a Peterbilt Air Trac rated at 46,000 lbs with 54" axle spacing. It has a steel suspension insert for up to 77" overhang and a dash-mounted dump switch with an indicator light. The cab rides on cab air suspension.
Cab & Interior
The aluminum day cab has a 131" BBC aluminum hood with a polished crown, spring tilt assist, and severe-service hood reinforcements. Exterior details include polished stainless rocker panels, a stainless V-style outside sunvisor, and a textured NFPA-compliant exterior grab handle. It also has a one-piece curved windshield, a fixed one-piece rear window, and dark window tint. The cab has thermal insulation and a Premier interior in Alpine Gray with a rubber floor. Seating includes a Sears Atlas 80 high-back air-ride driver seat in Ultraleather with a right-hand armrest. The passenger seat is a high-back, non-adjustable, non-air Peterbilt seat in vinyl, with a toolbox underneath. Both seats are black. The premium leather-wrapped multi-function steering wheel has audio and cruise controls on a tilt/telescoping column. Comfort features include power windows and door locks, a combination fresh-air heater/air conditioner with an additional fine particulate HVAC filter, a floor-mounted cup holder, vanity mirrors on the sunvisors, a rear wall map pocket, an ambient lighting package, and electric intermittent wipers. Audio and communications include a ConcertClass AM/FM/WB radio with 3.5 aux input, satellite radio, Bluetooth phone and audio, a USB port, and a dual USB charging port. A mid-level four-speaker package is included, and the radio mutes when the transmission is in reverse. A Cobra 29 CB radio is mounted in the center of the header, with dual 48" CB antennas on both mirrors. The cab also has global telematics hardware, a telematics wiring provision with J1939, power, and ground connections, and a 5-year SmartLinq remote diagnostics subscription. The instrumentation is a 15" digital cluster with bright bezel gauges. Round backlit gauges cover front and rear drive axle oil temperature (with a gauge guard), engine oil temperature, air suspension pressure, fuel filter restriction, and tractor brake application. The digital display covers transmission oil and clutch temperature, air filter restriction, engine and PTO hours, turbo boost, and percent torque. Dash controls include an ABS off-road switch, an ATC deactivation switch, and three additional pre-wired dash switches. Brake lights are disabled during engine braking. Mirrors are heated, motorized 7"x18" West Coast-style stainless units with dual 8" heated stainless convex mirrors and a passenger-door look-down mirror. Two 26" round roof-mounted air horns are fitted.
Body & Equipment
The fifth wheel is a JOST JSK37 no-tilt convertible top plate on a JOST lightweight inboard slider with 24" of air slide. It is set at the centerline of the bogie with an 8.6"–9.25" height, a left-hand release, and slide controls. Trailer connections use 12' straight 3-in-1 air and electric lines with dual 7-way plugs and a chromed hose tenna. A frame-mounted deck plate and access package covers both sides. Fuel capacity is 200 gallons from a 120-gallon right-hand tank and an 80-gallon left-hand tank. Both are 26" polished aluminum tanks with polished straps and a fuel cooler. A 24-gallon DEF tank is mounted on the left behind the cab, rearward of the fuel tank, with a polished stainless cover. Polished aluminum air tanks run outside the frame rails, and the system uses a Bendix AD-HF EP heated air dryer, pull cords on all tanks, nylon chassis hose, and a self-returning dash-mounted hand valve. The left-hand battery box is a polished, stylized aluminum unit with a non-slip step and heavy-duty reinforcement. A polished right-hand aftertreatment cab entry step matches it. Up front is a chromed, deep-tapered steel bumper with two tow points and a heavy-duty external tow eye. The truck also has stainless braceless quarter fenders and premium stainless mudflap hangers. Lighting includes projector headlight pods with integral turn signals, five LED bullet marker lights, daytime running lights with an override switch, and LED oval stop/turn/tail/backup lights in the frame taper. Additional features include mirror-mounted LED turn signals, self-canceling turn signals, two flush-mounted LED load lights behind the cab, and a load light switch with wiring. Auxiliary lighting wiring runs under the cab and on the air cleaners, and a beacon/strobe switch and wiring are provided. Key-off switched battery power supplies the J560 trailer connector. A 107 dB backup alarm, a fire extinguisher, and a triangle reflector kit are included.
Tires & Wheels
The steer tires are Continental 16-ply 11R24.5 HSR3 with TPMS sensors. The drive tires are eight Continental 16-ply 11R24.5 Conti HDR2+. All positions use Peterbilt 24.5x8.25 high-polish aluminum wheels.
Warranty & Protection
This truck comes with Peterbilt Class 8 standard coverage of 1 year/100,000 miles (160,000 km). It also carries a base emissions warranty of 5 years/100,000 miles.
Specifications

Estimate Your Monthly Payment
Use our online tool to get an estimated monthly payment and see how different financing options can impact your bottom line.
Our Experienced Finance Team is Here to Help
We work with a network of lenders to secure the most competitive rates available.
Fast and Easy Approvals:
Get the green light quickly so you can focus on running your business.
Expert Guidance:
Our knowledgeable finance professionals will guide you through every step of the process.
