2026 Isuzu NPR-HD / 14,500 GVWR
$86,200.00 (772) 489-2300
Key Features
- ✔ 215 HP Isuzu 4HK1TC Diesel Engine
- ✔ Aisin A465ID 6-Speed Automatic
- ✔ 16' Morgan Dry Freight Van Body
- ✔ Maxon 2,500 Lb Aluminum Liftgate
- ✔ 14,500 Lb GVWR on a 150" Wheelbase
- ✔ 7" Touchscreen Audio with Backup Camera
- Stock Number:
- T7 010222
- Model:
- NPR-HD / 14,500 GVWR
- Location:
- The Peterbilt Store - Fort Pierce
Overview
Overview
This new 2026 Isuzu NPR HD is a low cab forward (LCF) box truck with a 16-foot Morgan dry freight van body. It has a 14,500 lb GVWR, a 150" wheelbase and a Maxon rear liftgate, and it is set up for local delivery and dry freight work. The cab and body are both white.
Engine & Drivetrain
The engine is an Isuzu 4HK1TC diesel rated at 215 HP and built to EPA federal emissions standards. It drives through an Aisin A465ID 6-speed automatic transmission to a rear axle with a 4.56 to 1 ratio. A Wabco exhaust brake adds braking control. The exhaust is horizontal with SCR aftertreatment, and the truck has a Donaldson air cleaner. Electrical power comes from a 140-amp alternator and dual 12V maintenance-free batteries. The chassis also has a PTO switch and an engine emergency shutdown. Fuel is carried in a 30-gallon stainless steel tank.
Chassis & Axles
The front axle is rated at 6,830 lbs and the R040 rear axle at 11,020 lbs, for a GVWR of 14,500 lbs. Wheelbase is 150". The brakes are a hydraulic four-disc ABS system with vacuum and power assist. Electronic Vehicle Stability Control with ASR helps with traction and stability. Morgan installed a 6" channel chassis frame extension for the body.
Suspension
The front suspension is rated at 6,830 lbs. The rear suspension is rated at 9,880 lbs.
Cab & Interior
The cab has three-person seating with a driver seat and the factory restraint system. HVAC, power windows and power locks are standard. The audio system has a 7" touchscreen and a backup camera, and Morgan completed the camera installation on the rear frame. There is also an AM/FM radio with aux input. Other equipment includes keyless entry, a tire pressure monitoring system and LED lighting with washers. A fire extinguisher and triangle kit and an electrical backup alarm are included. The dash has a switch with an indicator light for the body’s dome lamp and a separate power cut-off switch for the liftgate.
Body & Equipment
The body is a Morgan 16-foot dry freight van, model VSD09716096. Inside it measures 191.13" long, 92.13" wide and 97.12" high. The rear door opening is 88" wide by 91.25" high. The body is full-mounted with U-bolts, using wooden crusher blocks in the chassis frame at each U-bolt.
The subframe has 3" I-beam crossmembers on 12" centers with 6" channel longrails. Mylar tape between the steel subframe parts and the aluminum lower rails helps prevent corrosion. The floor is 1-1/8" laminated hardwood fastened to the subframe. The boards are shiplapped and pre-undercoated, and a galvanized steel angle runs flush across the rear. Water-based undercoating is applied to the long rails and wheel pans.
The sidewalls and front wall use lightweight aluminum hat posts on 16" centers with .040 aluminum skins prepainted white. The front wall has aerodynamic aluminum radii and Poly-Tuff corner caps. The sides are lined with full 3/8" plywood and the front with full 1/2" plywood. Four rows of recessed E-track are mounted on the sidewalls, at 30" and 60" from the floor on each side. The roof is a single .032 aluminum sheet with anti-snag roof bows on 24" centers. Its crowned design keeps water and ice from pooling.
At the rear, a Whiting aluminum-covered white overhead door is monobolted and sealed with a vinyl seal kit. It is set in a galvannealed rear frame with a V-groove endplate for a quick-mount liftgate, plus endplate and lamp post reinforcements. The rear frame steel is painted white and the rear endplate black.
The liftgate is a galvanized Maxon TE25L rated at 2,500 lbs, with a 48" x 80" aluminum platform, dual cart stops and power down. It also has a cycle counter and a 96"-wide extension plate with a one-step bumper.
Lighting includes Tecniq S37 sealed LED clearance lights in the front corner caps, side top rails and across the rear header. Tecniq LED combination stop, turn, tail and backup lamps are recessed in the rear posts, and a single LED dome lamp lights the cargo area. Safety equipment includes 12" knurled aluminum grab handles on both sides at the rear and conspicuity tape on both sides, the rear door and the underride protector. The body also has a lighted license plate bracket, 24" x 30" mudflaps, and Morgan logo and safety decals.
Tires & Wheels
All tires are 215/85R16E low rolling resistance radials with all-season tread front and rear. They are mounted on 16" x 6" six-hole wheels, with dual rear wheels.
Specifications

Estimate Your Monthly Payment
Use our online tool to get an estimated monthly payment and see how different financing options can impact your bottom line.
Our Experienced Finance Team is Here to Help
We work with a network of lenders to secure the most competitive rates available.
Fast and Easy Approvals:
Get the green light quickly so you can focus on running your business.
Expert Guidance:
Our knowledgeable finance professionals will guide you through every step of the process.
